AUDIOZEUG DiGI-MK3 – USB audio interface
DiGI-MK3
€ 327,00
Delivery 2-3 Working days
Description
Hum in the PA, right when the room goes quiet and everyone's looking at the booth. Nine times out of ten, the ground loop sits between your laptop and the system. The Audiowerkzeug DiGI-MK3 is a USB audio interface with galvanically isolated digital outputs that removes that problem before it happens. Your signal goes digital and fully decoupled to the mixer, processor, or power amp.
Try the Audiowerkzeug DiGI-MK3 yourself Available in our Experience Store in Sint-Niklaas
Features
Three galvanically isolated digital outputs are on board at once: S/PDIF RCA, S/PDIF Toslink, and AES/EBU on XLR. The isolation sits inside the unit itself, so you no longer need a separate DI box to cleanly decouple your laptop from the system. Inside are audiophile-grade components, built with the quality you'd expect from German craftsmanship. The unit is class compliant and plug and play on Windows, macOS, and Linux, and runs entirely on USB bus power.
Key features
- No more hum or ground loops between laptop and system
- No extra DI box needed, saving a case and two cables
- Three digital formats at once, so you pick on-site whatever the venue supports
- AES/EBU runs up to 100 meters, plenty for FOH to stage
- Works instantly on any laptop, even a borrowed backup machine
- No adapter and no free outlet needed in the booth
- Compact and rugged enough to live permanently in your flight case
Technical specifications
- Type: stereo USB audio interface with digital outputs
- Resolution: 16 to 24 bit
- Sample rates: 32, 44.1, 48, and 96 kHz
- Outputs: S/PDIF RCA (75 ohm), S/PDIF Toslink (Toshiba F05), AES/EBU XLR
- All outputs galvanically isolated from each other
- Input: USB 2.0 Full Speed, bus powered, no external power
- Max. cable lengths: USB 5 m, RCA 20 m, Toslink 10 m, AES/EBU 100 m
- Channels: 2 playback channels, no inputs, no MIDI
- Systems: Windows XP through 11 (32/64-bit), macOS 10.4 or newer, Linux from kernel 2.6
- Dimensions: 100 x 42 x 100 mm, weight 455 g
Ideal for
- DJs who want to go digital into the mixer or venue system
- Mobile sound engineers and rental companies
- Fixed installations in clubs, bars, and venues
- Studios looking for a clean digital output
Perfect with
- Digital mixing consoles with an AES/EBU input
- Speaker processors and DSP amplifiers
- DJ mixers with an S/PDIF RCA or optical input
- The rack4AUDIOWERKZEUG tray, for up to four units in 19-inch format
Pro Tip: for AES/EBU over long distances, use a real 110-ohm digital cable, not a standard mic cable. In the booth itself, S/PDIF RCA is the quickest to hook up and just as quiet.
In the box
- Audiowerkzeug DiGI-MK3
- USB-A to USB-B cable
- Manual
FAQ
Do I need a driver?
No. The unit is class compliant; plug it in and it shows up instantly as a sound card.
Does this replace my DI box?
For the laptop-to-system connection, yes. The galvanic isolation is already built in.
Can I record with it too?
No, the DiGI-MK3 is output-only. Two playback channels, no inputs.
Can I use all three outputs at once?
Yes, all three are active simultaneously and isolated from each other.
Hook it up properly once, and you won't hear hum from your system for the rest of the season. Order now at Pro Gear.