B-stock: Algam Lighting BLINDER 400 CW-WWA | LED Blinder 4x100W
€ 329,00
€ 263,20
Delivery 2-3 Working days
Description
A classic 4-lite halogen blinder delivers that warm, orange flash everyone knows from festival stages, but it pulls well over 2000 watts from your circuit and runs scorching hot. The Algam Lighting BLINDER 400 CW-WWA gives you the same effect with four 100 W COB LEDs and a total draw of 200 W. You keep the halogen look, from cool white to deep amber, and leave the heat and the heavy power distribution behind. An LED blinder with a halogen look for stage and events.
Features
Each of the four COB LEDs combines cool white, warm white and amber, and you set that mix per LED. The blinder can mimic the colour shift of a glowing filament, or you can go for a crisp cool white that halogen never reaches. Over DMX in 7 or 16 channels you control the intensity and colour of every LED individually and trigger built-in effects such as colour jump, fade, pulse and strobe. Without a desk, the auto mode and sound-active mode take over.
Key features
- Four 100 W COB LEDs: a stage-filling blinder flash at just 200 W total
- Cool white, warm white and amber mixable per LED, from crisp white to halogen amber
- DMX in 7 or 16 channels: every LED and every tint controlled separately
- Built-in effects: colour jump, colour fade, pulse and strobe
- Auto, sound-active and master/slave modes for shows without DMX
- Optics tilt a few degrees inward or outward per pair for wider or tighter coverage
- Steel housing with hanging bracket, built for touring and rental
Technical specifications
- Light source: 4 x 100 W COB LED (cool white, warm white, amber)
- Modes: auto, sound-active, master/slave, DMX
- DMX channels: 7 or 16
- DMX in/out: XLR 3-pin
- Control: digital display with 4 buttons
- Housing: steel
- Power supply: 100-240 V, 50/60 Hz
- Power consumption: 200 W
- Dimensions: 365 x 350 x 210 mm
- Weight: 9.05 kg
- Protection rating: IP20 (indoor use)
Ideal for
- Live bands and festival stages that want a classic blinder flash
- Rental companies and stage builders phasing out halogen
- Clubs, DJ shows and event venues
- Theatre and TV productions with warm accent lighting
Pairs perfectly with
- Wolfmix W1 or WING for DMX control without a laptop
- 3-pin DMX cables to daisy-chain several blinders
- Other Algam Lighting fixtures on the same DMX line
- A second BLINDER 400 CW-WWA for a symmetrical backline
Pro Tip: Run the blinder in 16-channel mode and let amber lead white by a fraction on the fade-up: that recreates the warm-up flash of a filament. The 7-channel mode patches faster, but you lose that nuance.
In the box
- Algam Lighting BLINDER 400 CW-WWA
- Power cable
- Velcro cable tie
- Hanging bracket
FAQ
Can I link several units together?
Yes. Through the XLR 3-pin in and out you daisy-chain them on one DMX line, or you set one unit as master and let the others follow in slave mode.
How many blinders can I run on one circuit?
Each unit draws a maximum of 200 W. On a 16 A circuit at 230 V you could in theory fit more than ten, but keep headroom for the rest of your rig.
Does it work outdoors?
No. With an IP20 rating it is meant for dry indoor spaces only. For outdoor use, place it under cover or choose an IP-rated fixture.
Does it match the warm look of a halogen blinder?
Thanks to the amber LEDs it gets very close, and you choose the tint yourself. The colour shift on dimming is recreated through the DMX mix rather than a heating filament.
Order now at Pro Gear and give your stage that classic blinder flash, without the halogen power bill.
| B-stock | Yes |
|---|