EN
No products
Total excl. VAT €0
To basket

Chauvet DJ Shocker FX - LED Strobe with Multi-Effect RGBW

Chauvet DJ Shocker FX - LED Strobe with Multi-Effect RGBW

€ 89,00

Choose your colour:

NoColour

Choose your size:

1Size
Delivery 2-3 Working days

Description

Want a killer drop? One press of the button and the Chauvet DJ Shocker FX blasts a blinder over the crowd, switches to an RGB wash, and closes with a tight strobe hit. The Chauvet DJ Shocker FX is a compact LED strobe with 12 separate sections, delivering blinder, wash, and strobe in one unit weighing barely a kilo. Ideal if you want a full-fledged lighting effect without hauling a ton of gear.

Features

Eight sections with 280 tri-color RGB LEDs and four sections with 56 cool-white LEDs combine into 12 individually controllable zones. That means color washes, chases, and pixel effects via the built-in macros, without programming everything yourself. With a strobe from 0 to 20 Hz and a 139° field angle, you fill a dance floor with ease. Power linking lets you chain up to 20 units at 230 V, saving on cables and extension cords.

Key Features

  • Blinder, wash, and strobe in one compact housing: three effects, one unit in your flight case.
  • 12 controllable sections (8 RGB + 4 white) for chases, pixel effects, and zone lighting.
  • Built-in automatic programs and effect macros: instant show, even without a lighting desk.
  • Four DMX modes (8, 18, 30, or 43 channels): quick triggering or full per-zone control.
  • Master/slave linking: multiple units in sync without a DMX controller.
  • Power linking up to 20 units at 230 V: fewer cables, faster setup.
  • Barely 1 kg and 26 cm wide: fits anywhere and travels in the optional CHS-25 bag.

Technical Specifications

  • Light source: 280 tri-color LEDs (50 W, 1.5 A) + 56 cool-white LEDs (11 W, 0.8 A)
  • LED lifespan: 50,000 hours
  • Luminous flux: 1,981 lumens
  • Illuminance: 219 lux at 2 m
  • Beam angle: 97° (beam), 139° (field)
  • Strobe frequency: 0 to 20 Hz
  • DMX channels: 8, 18, 30, or 43
  • DMX connection: 3-pin XLR
  • Power supply: 100-240 VAC, 50/60 Hz (auto-ranging)
  • Power draw: 45 W (0.4 A at 230 V)
  • Power linking: 20 units at 230 V (12 at 120 V)
  • Dimensions: 260 x 82.6 x 129 mm
  • Weight: 1.0 kg
  • Certification: CE, RoHS

Ideal For

  • Mobile DJs and drive-in shows
  • Parties, student events, and club nights
  • Bands and small stages wanting a blinder or strobe accent
  • Rental companies looking for a compact all-round effect light

Pairs Perfectly With

  • Chauvet DJ IRC-6 infrared remote control
  • Chauvet DJ CHS-25 VIP gear bag
  • Chauvet DJ Xpress-512S DMX interface
  • Chauvet DJ CLP-15N clamp

Pro Tip: Put the Shocker FX in 43-channel mode when driving it from a lighting desk or software: you control every zone separately and build chases that look far bigger than the unit itself. If you mount it low behind the DJ booth, tilt it up slightly so the blinder hits the crowd without blinding the DJ.

In the Box

  • Chauvet DJ Shocker FX
  • Power cable
  • Quick start guide

FAQ

Can I use the Shocker FX without a DMX controller?

Yes. The built-in automatic programs run standalone, and the optional IRC-6 remote lets you switch programs and effects from a distance. Link multiple units via master/slave.

How many units can I power in series?

At 230 V, you can power-link up to 20 Shocker FX units on a single circuit.

Is this a full-fledged blinder?

For small and mid-size venues, yes: the four white sections deliver a bright flash and the RGB sections fill in as wash. For large stages, it's best to combine multiple units.

Which DMX mode should I choose?

8 channels for quick basic control, 43 channels if you want to drive each zone separately.

Blinder, wash, and strobe in one compact unit that fits anywhere. Order now at Pro Gear and give your next set that extra punch.

Related products