EN
No products
Total excl. VAT €0
To basket

Chauvet DJ Shocker Panel FX IP - LED Strobe Panel with Effects (IP65, Outdoor)

€ 470,00

Choose your colour:

NoColour

Choose your size:

1Size
Delivery 2-3 Working days

Description

The Chauvet DJ Shocker Panel FX IP is an outdoor strobe, blinder, and wash in one IP66 housing that just keeps performing. Strobe, blinder, and wash switch in a fraction of a second, so you don't need to hang three separate fixtures.

The panel combines 8 RGB sections with a separate strip of 8 cool-white sections, giving you 16 individually controllable zones for chases, pixel mapping, and blinder hits. With 13,626 lumens and a 119° angle, one unit easily fills a wide stage or an outdoor dance floor. The Neutrik TRUE1 connectors are water-resistant and let you loop through quickly and safely: up to 11 units at 230V. The built-in GORE vent keeps condensation out of the housing, so the fixture stays dry even through temperature swings.

Key features

  • Three fixtures in one: strobe, blinder, and wash with no switching or extra rigging
  • IP66 and an operating temperature of -30 to 45°C, so it works through rain, dust, and winter cold
  • 16 controllable sections (8 RGB + 8 white) for chases, pixel effects, and targeted blinder hits
  • Built-in macro effects you can launch without a console, via the display or DMX
  • Password-protected touch display, so no one on site changes your settings
  • Strobe up to 20 Hz with an intense cool-white strip that really cuts through the show
  • Fast setup thanks to TRUE1 power in/out and 5-pin DMX in/out

Technical specifications

  • RGB light source: 480 tri-color LEDs, 50,000-hour lifespan
  • White light source: 32 cool-white LEDs at 1.8 W, 50,000-hour lifespan
  • Sections: 8 RGB + 8 cool white, individually controllable
  • Light output: 13,626 lumens, 1,131 lux at 2 m
  • Beam angle: 119°, field angle: 158°
  • Strobe frequency: 0 to 20 Hz
  • DMX modes: 8, 18, 34, or 47 channels
  • DMX connectors: 5-pin XLR in/out
  • Power: Neutrik TRUE1 in/out, 100-240 VAC, 50/60 Hz (auto-ranging)
  • Power draw: 231 W, 1 A at 230V
  • Linking: up to 11 units at 230V
  • IP rating: IP66
  • Operating temperature: -30 to 45°C, startup from -20°C
  • Pressure equalization: integrated GORE vent
  • Dimensions: 330 x 130 x 173 mm
  • Weight: 4.7 kg
  • Power cable: 1.5 m
  • Certifications: CE, RoHS

Ideal For

  • Festivals and outdoor events where weather can't be an excuse
  • Rental companies wanting one fixture that works indoors and out
  • Lighting techs who want strobe, blinder, and wash on a single DMX address
  • DJs and club night producers who want blinder hits and pixel chases in their show
  • Fixed installs on terraces, beach bars, and covered outdoor stages

Pairs Perfectly With

  • Chauvet DJ ShowXpress lighting software for pixel mapping and shows
  • Chauvet DJ D-Fi Hub 2 for wireless DMX to your fixtures
  • Chauvet DJ CHS-25 VIP Gear Bag for safe transport
  • Neutrik TRUE1 extension cables and 5-pin DMX cables for a watertight loop

Pro Tip: Put the RGB sections and the white strip on separate DMX groups in your console: this lets you run a calm color wash while saving the white blinder for the drops. The 47-channel mode gets the most out of the 16 sections, but check first that your console handles that channel count comfortably across multiple units.

In the Box

  • Chauvet DJ Shocker Panel FX IP
  • Power cable with Neutrik TRUE1 connector (1.5 m)
  • Quick start guide

FAQ

Can I really leave the Shocker Panel FX IP out in the rain?

Yes. With the IP66 housing, water-resistant TRUE1 connectors, and the GORE vent, it's built for permanent outdoor rigs. Just make sure your DMX and power cables are IP-rated too, or your cabling becomes the weak point.

What's the difference from the regular Shocker Panel FX?

The IP version has the same 8 RGB and 8 white sections and the same DMX modes, but sits in a sealed IP66 housing with TRUE1 power, a GORE vent, and a wider temperature range. It weighs slightly more as a result (4.7 kg).

How many units can I loop through on one outlet?

At 230V you can loop up to 11 units through the TRUE1 power out. Just factor in your circuit's total load and use a properly rated fuse.

Can I use the effects without a DMX console?

Yes. Launch the built-in macros directly from the touch display, ideal for small gigs or as a standalone blinder. For pixel chases across multiple units, use DMX or ShowXpress.

One fixture that combines strobe, blinder, and wash and isn't afraid of bad weather: that's what you need for an outdoor stage. Order now at Pro Gear and rig your next outdoor show worry-free.

Related products