Free Color S1000 RGB – 1000W RGB LED strobe with DMX
S1000 RGB
€ 157,95
Delivery 2-3 Working days
Description
The Free Color S1000 RGB is a 1000W RGB LED strobe that fills the whole dance floor, with full DMX control for every move you plan. Ready for clubs, stages, and mobile setups that want more than a blinking SMD bar.
Inside the housing sit 960 SMD RGB 3-in-1 LEDs that together pump 1000W of output into the room. The wide 120° beam angle covers large areas in one shot, ideal for stages and clubs where you don't want any dead corners. Control runs via DMX512 with 8 channels, master/slave, automatic programs, or sound activation. PowerCON in/out makes daisy-chaining multiple units fast and tidy, and both 3-pin and 5-pin XLR come standard.
Key features
- 1000W total power for strong output, even in large venues
- 960 SMD RGB 3-in-1 LEDs for full-color flashes in any hue you want
- Wide 120° beam angle for even coverage of stage or dance floor
- Adjustable flash rate from 1 to 30 flashes per second
- DMX512 with 8 channels plus master/slave and sound-controlled mode
- PowerCON in/out for tidy daisy-chaining of multiple units
- 20,000-hour LED lifespan, so minimal maintenance
Technical specifications
- Light source: 960 SMD RGB 3-in-1 LEDs
- Lifespan: 20,000 hours
- Beam angle: 120°
- Strobe: electronic, 1 to 30 fps
- Dimmer: electronic, 0 to 100%
- DMX channels: 8
- Control modes: DMX512, master/slave, auto, sound activation
- Power supply: AC 110 to 240V, 50/60 Hz
- Power: 1000W
- DMX connections: XLR 3-pin in/out and XLR 5-pin in/out
- Power connection: powerCON in/out
- Dimensions: 500 x 230 x 240 mm
- Weight: 7.5 kg
Ideal for
- Club and discotheque DJs with a fixed lighting setup
- Mobile DJs for larger party venues
- Lighting and sound technicians for live concerts and festivals
- Theater technicians who want to add color to strobe cues
- Rental companies looking to add an affordable RGB strobe to their inventory
Compatible with
Works with any standard DMX512 controller. With both 3-pin and 5-pin XLR on board, it fits into any existing lighting setup without adapters. powerCON pass-through makes it simple to link to other fixtures on one circuit.
Pro Tip
Mount it a bit higher and angle it down toward the dance floor. The 120° beam angle does the rest, and it keeps the crowd up front from getting strobed straight in the eyes — safer and better-looking too.
In the box
- 1x Free Color S1000 RGB LED strobe
- 1x User manual
FAQ
Does this strobe run standalone without a DMX controller?
Yes. The automatic programs and sound activation run fully stand-alone. Set it up at a gig, plug it in, and it follows the music.
Can I loop multiple units on one circuit?
Yes. powerCON in/out lets you chain multiple units in series, as long as you respect the fuse rating (1000W per unit adds up). DMX loops through via the 3-pin or 5-pin XLR.
Is the S1000 RGB suitable for outdoor events?
Not directly. It's designed for indoor use only. For outdoor use you need an IP-rated canopy or a waterproof fixture.
Which DMX mode do I need for RGB control?
The 8-channel DMX mode gives you separate control over red, green and blue, plus dimmer, strobe speed and function selection. Sufficient for both basic color changes and layered shows.
Looking for a strobe that really makes an impact on your dance floor? Order now at Pro Gear.
| Strobe | Yes |
|---|