Pro Lux ARC 4418IP - IP65 LED Flood
€ 539,00
Options
Delivery 2-3 Working days
Description
The Pro Lux ARC 4418IP is an IP65 architectural LED flood with 44 RGBWA+UV LEDs at 18 W each, built to wash buildings, façades and set pieces in colour whatever the weather does. One fixture, one power cable, and that grey wall becomes the backdrop of the night.
At its heart sit 44 6-in-1 LEDs (RGBWA+UV) delivering more than 16.7 million colours, with amber and UV on board for warmer tones and deep blacklight effects. The 25° beam throws that colour cleanly across a façade or scenic wall, and thanks to the IP65 housing with waterproof XLR and powerCON connectors it can stay out in the rain. Control it via DMX512 or RDM in 6 or 11 channels, or let it run on its own in auto, sound or master-slave mode. Everything is set on the LCD display, no laptop needed.
Key features
- One flood that fills an entire façade or scenic wall, with no hotspots thanks to the 25° optics
- Amber and UV in the mix: warm white that actually looks warm, and blacklight on demand
- IP65: no rain cover, no stress at an outdoor event in October
- 6- or 11-channel DMX mode, as simple or as detailed as your show requires
- Standalone in auto, sound or master-slave mode, handy for fixed installs without a controller
- Electronic strobe up to 25 fps and 0-100% dimmer for both show and ambience
- powerCON in/out and XLR in/out: fast daisy-chaining across a row of fixtures
Technical specifications
- LEDs: 44 x 18 W RGBWA+UV 6-in-1
- LED lifespan: 50,000 hours
- Beam angle: 25°
- Colour mixing: RGBWA+UV, over 16.7 million colours
- Strobe: electronic, 1-25 fps
- Dimmer: electronic, 0-100%
- Control: multifunction LCD display
- DMX channels: 6 / 11
- Modes: DMX512, RDM, master-slave, auto, sound
- Power input: AC 110-240 V, 50/60 Hz
- Total power consumption: 600 W
- DMX connection: waterproof 3-pin XLR in/out
- Power connection: powerCON in/out
- Ingress protection: IP65
- Dimensions: 500 x 150 x 400 mm
- Weight: 12 kg
Ideal for
- Façade and architectural lighting at events and temporary installations
- Rental companies looking for a rugged outdoor wash
- Festivals, Christmas markets and city celebrations
- Set and stage wash on large open-air stages
- Fixed installations on buildings and terraces (in standalone mode)
Pairs perfectly with
- Wolfmix W1 and MaestroDMX for quick shows without a console
- Free Color C192 V2 as a compact DMX controller for fixed installs
- Pro Lux ARC 4015 as the smaller sibling for lower façades
- Pro Lux DMX COMBO cable 2m IP for daisy-chaining several fixtures outdoors
Pro Tip Place the ARC 4418IP as low as possible and angled upwards against the façade: that gets the most out of the 25° beam and gives you a smooth gradient over the full height. Blend a touch of amber into your white so brick and natural stone read as warm rather than cold.
In the box
- Pro Lux ARC 4418IP
- Power cable
- Signal cable
- User manual
FAQ
Can I use the ARC 4418IP without a controller?
Yes. In auto or sound mode it runs on its own, and master-slave lets several fixtures follow the same programmes. For your own scenes and colour transitions you will need a DMX controller.
Do I need a rain cover?
No. With its IP65 rating and waterproof connectors the fixture can stay outside in rain and dust. Do use cables with IP connectors though, otherwise the plug becomes the weakest link.
Can it be used indoors too?
Of course, but keep the 25° beam and the power in mind: this is a flood for large surfaces, not a par for a small function room.
What is the difference between 6- and 11-channel mode?
The 6-channel mode is meant for simple colour control, the 11-channel mode adds parameters such as dimmer, strobe and built-in programmes. Check the manual for the exact channel layout.
Ready to put that façade in colour before the year-end season kicks off? Order now at Pro Gear and put the ARC 4418IP to work on your next outdoor production.
| Outdoor use possible | Yes |
|---|