Wolfmix WING - fader expansion for W1
€ 949,00
Delivery 2-3 Working days
Description
Connect the WING to any W1 MK1, MK2 or MK3 and the two merge into one system: the W1 stays your touchscreen, the WING becomes your hands. The 8 motorised faders with touch-sensitive caps and RGB lightguides snap to the right position by themselves, and eight OLED displays show exactly what each strip is holding. With Cue List, Control and Mapping you build a timed show, reach straight into fixtures or lay out the surface entirely your way. Together with the W1 you drive up to 8 DMX universes.
Key features
- Eight motorised faders that glide to the right position whenever you switch group or page
- Every fixture group splits into eight subgroups, so you can drive front and rear movers separately, for instance
- Cue List with fade and hold times, automatic cue jumps and MIDI Time Code for shows that run tight to the clock
- Four DMX outputs (2x 3-pin, 2x 5-pin), each port freely assignable to any universe
- Mapping mode: arrange faders, buttons and encoders across multiple pages however you like
- Doubles as a generic MIDI controller for third-party software and hardware
- One USB cable carries data and power to the W1, no extra adapter on that side
Technical specifications
- 8 motorised faders with capacitive touch caps and RGB lightguides
- 8 OLED displays
- 8x5 RGB button matrix with dedicated group controls
- Main fader with OK/GO and CANCEL buttons
- SCROLL and FINE encoders plus 2 assignable encoders
- Up to 4 DMX universes (2048 channels); universes 3 and 4 via add-on; up to 8 universes combined with the W1
- Up to 680 fixtures and 1500 beams
- 8 fixture groups, each divisible into 8 subgroups
- DMX outputs: 2x 3-pin XLR, 2x 5-pin XLR
- USB-C power (15V, 3A), USB-C data, USB-A to the W1
- Processor: 220 MHz ARM, 8 MB RAM, 16 MB flash
- Housing: ABS with powder-coated steel base plate, 100 mm VESA (M4, 6 mm max.)
- Dimensions (H x W x D): 57 x 290 x 220 mm
- Weight: 1.5 kg
Ideal for
- Lighting techs who want to grow their W1 setup into bigger rigs
- Rental companies and event agencies with ever-changing shows
- Theatres, churches and venues running timed cue lists
- Live bands and DJs who want hands-on control during the set
Pairs perfectly with
- Wolfmix W1 MK1, MK2 and MK3 (required)
- Wolfmix universe add-on for universes 3 and 4
- 3-pin and 5-pin XLR DMX cables
Pro Tip: Power the WING from a USB-C PD supply delivering 15V/3A and let the W1 feed off the USB-A port: one socket for both units. Program your cue lists on the W1 beforehand and let the WING play them live, so your hands stay free for the faders.
In the box
- 1x Wolfmix WING
FAQ
Does the WING work without a W1?
Not for setup: you need a W1. Once synchronised, the manufacturer states the WING can run standalone with the transferred project, but programming happens on the W1.
Do I need a universe add-on?
Universes 1 and 2 come with the WING; universes 3 and 4 require an add-on. Combined with the W1 you reach 8 universes.
Will it fit my older W1 MK1?
Yes, MK1, MK2 and MK3 all work. The MK3 is additionally designed to sit flush against the WING.
Can I use the WING as a MIDI controller?
Yes, over USB-C you control compatible software and hardware.
Ready to let your W1 grow? Order now at Pro Gear and feel the difference of real faders under your fingers.